Leading Henan Hongtu mechanical equipment limited company produces the latest small corn harvester technology, it is the use of a machine is convenient and flexible, and can be common in rural areas with small four wheels, the corn fashion the small corn harvester, after harvest can be set down, does not affect the normal use of the tractor. Since the rapid growth of market sales, sales in 2017 hung brand small corn harvester past to achieve zero inventory, more than 500 small corn harvester produced and sold out, this is not a miracle in corn harvester industry cannot. After thorough analysis, we should conclude that the small corn harvester produced by our company is small investment, convenient and flexible to use, which accords with the needs of the rural areas in China, and caters to the needs of users. The operation of the corn harvester is very simple. As long as the tractor driver can open up, all the friends will quickly start, but some details are often ignored by users. The company technicians have passed the field investigation and analysis, and now share the normal operation steps of the latest small corn harvesters. We hope that users can successfully finish the corn harvest and enjoy the joy of autumn harvest.
1. The small corn harvester should go to the ground at low forward speed, but the engine must reach the normal operating speed before the harvest, so that the thresher can run at full speed. Self-propelled small corn harvester before entering fields, choose the good job positions, and the stepless speed to a minimum speed, increase the speed, try to achieve through the stepless speed change, and avoid the replacement of gear. When the head is received, the cutting platform should be raised slowly to reduce the speed of the forward turning, but the throttle should not be reduced so as not to cause the block of the threshing roller.
Two. The adjustment of the small corn harvester. The self-propelled corn harvester should at any time according to the maize yield, dry wet degree, natural height and lodging on the threshing clearance, reel and position and height were adjusted during harvest; and a backpack type harvester such adjustment should be carried out in the ground.
Three. Choose big throttle. When a small corn harvester is operated, it should be based on the principle of maximum efficiency. It should always operate at large throttle while harvesting. It is not allowed to decrease the speed of advance by reducing the throttle, because this will reduce the speed of the drum, reduce the quality of the operation and even block the drum.
Four. Selection of job files. In the harvest process, the small corn harvester should choose reasonable work position according to the wheat yield, the natural height, the dry and wet degree and so on.
Five. The selection of the width of the operation. Generally speaking, combine harvesters should be full of jobs. But when the corn yield is too high or the humidity is too large, when the lowest operation is still overloaded, we should reduce the cutting width. When the crop cut is reduced to 80%, it can meet the requirements.
Six. The harvest of dry crops. When corn is ripe and has a suitable harvest period, it is easy to drop grain when harvested, and the speed of the reel wheel should be lowered down, so as to prevent the wheel blow up, and reduce the operation speed, and also arrange for harvesting in the morning or evening.
Seven. The harvest of the lodged crops. The corn harvest transverse lodging, the reel can be appropriately reduced, but the general direction of the other side in the lodging maize harvest, to ensure complete separation, feeding smoothly, reduce corn crop harvest losses; vertical lodging, lodging should reverse direction, but reverse the harvest returns empty, seriously reduce the work efficiency. When the crop lodging is not very serious should be two-way back and forth harvest, the harvest will be the reverse reel tooth plate adjusted to 15 DEG ~30 DEG forward tilt position, and the reel is reduced and backward; consequent harvest should be dial plate tooth adjustment reel to tilt backward 15 degrees ~30 degrees. And the reel rises and forward.
Eight. Observant and alert, very alert. Machine hand harvesting, should beeye frequently, ear and hands frequently. At any time, watch the instrument on the driving table, the flow of the crops on the reaper, and the operation of the working parts. Listen carefully to the sound of the engine's threshing roller and other working parts. If you see or hear the abnormal situation, you should stop and remove it imtely. When you hear the engine sound boring, cylinder abnormal sound and see the engine black smoke, indicating the drum threshing resistance is too large, should be appropriate to increase the gap, reduce the speed of the threshing cylinder or imtely on the main clutch shift parking, cut off the knapsack corn harvester forward momentum, and then increase the throttle to sound normal after threshing. Then, a lower gear or reduce cutting operation, carry out normal operations.
All of the customers who come to our company to buy the machine, our company is free to operate the training of corn harvesters, so that you can fully master the correct operation methods and procedures of small corn harvesters. The company has professional R & D team. Every year it will constantly upgrade and upgrade technology according to user feedback problems, ensuring that the most new and economical small corn harvester is provided for users. The company has set up a dedicated customer service service department, the majority of users can feel free to contact us if necessary, we will work for you burden.